Anion ion exchange resins for Nitrate removal from water

The Environmental Protection Agency has set a maximum contaminant level of 10 mg/L for nitrate and nitrite in public water supplies.
Nitrate in water is undetectable without testing because it is colorless, odorless, and tasteless. A water test for nitrate is highly recommended for 
households with infants, pregnant women, nursing mothers, or elderly people. These groups are the most susceptible to nitrate or nitrite contamination.

 Sunresin produces the high quality LSC106 plus anion resin which is specially designed for Nitrate removal from water and any other aqueous solution.
The resin with its triethylamine functional group is with high selectivity to NO3 in water. 
The resin is with high capacity and physic stability, the special improvement on matrix makes it better resistant to pressures.

If you will have any interest, pls kindly contact us via qqyun@sunresin.com

评论

发表评论

此博客中的热门博文

A type of selective ion exchange resin for Lead removal

图片
Lead is a naturally occurring toxic metal found in the Earth’s crust. Its widespread use has resulted in extensive environmental contamination,  human exposure and significant public health problems in many parts of the world. Lead can enter drinking water when service pipes that contain lead corrode,especially where the water has high acidity or low mineral content that corrodes pipes and fixtures.  Lead in drinking water is very harmful to human. In China, the government set 0.01mg/L as the minimum level of content for lead in drinking water. Sunresin produces a type of high quality lead selective ion excange resin for drinking water treatment.  The LSC755 resin is a weak acid, macroporous, chelating ion exchange resin with amino phosphonic acid groups.  This structure is good for the chelating with heavy metal ions, especially for lead removal from aqueous solution.  The resin has better adsorption rate for lead which works with bigger treatment capaci...
阅读全文

Selective resins for brine purification for ionic membrane caustic soda production

图片
SEPLITE LSC750 is a weak acid, macroporous, chelating resin with amino phosphonic acid groups. This structure is good for the chelating with heavymetal ions. Compared with the chelating resin with amino carboxylic acid groups, resins with amino phosphonic acid groups are much easier to chelate with certain cation ions. SEPLITE LSC750  is more suitable for removing of the heavy metals like Ca2+,Mg2+,Sr2+,Ba2+,Ni+ etc  thus to fully purify the second brine during production of membrane caustic soda. For SEPLITE LSC750 resin,it enjoys the advantage of below: 1.Superior mechanical and excellent resistance to osmotic shock, good mechanical strength, 2.Low loss, lesstopping annually, stableKinetics performance 3.High chelating capacity,high chelating capacity leads to bigger amount of brine treated per cycle 4.More uniform for particle size,excellent running kinetics during regeneration Refer to Sunresin website for more information: http://en.sunresin.com/
阅读全文

Selective ion exchange resins for Perchlorate removal from water

The EPA defines the Perchlorate as a contaminant in water. It is found that perchlorate may have an adverse effect on the health of persons and  is known to occur in public drinking water systems with a frequency and at levels that present a public health concern.  Sunresin produces a special type of selective ion exchange resin Seplite LSC106 for perchlorate removal, especially from drinking water. With its special matrix and tributylamine function group, the resin can realize high selectivity for perchlorate. In operation, Seplite LSC106 shows good mechanical strengh and excellent mechanical strength to osmotic and thermal shock. Since not easy handling the regeneration effluent, this resin is not suggested to be regenerated for recycling use. For any interest, pls kindly refer to our website: http://en.sunresin.com/
阅读全文